Windows can't get the Network Settings from the router in Windows 11/10

Download PC Repair Tool to quickly find & prepare Windows errors automatically

If you receive a message Windows tin can't become the Network Settings from the router when using the Printer, Wi-Fi, Mobile Hotspot, WiFi Speakers, etc, on your Windows 11/10 computer, perhaps something here will assistance you set up the problem.

Windows can't go the Network Settings from the router

1] Use correct credentials

First and foremost, ensure that you are using the right Security Central, Pivot or Password for the router

2] Disable & re-enable network connection

Disable the internet connexion on your calculator and re-enable information technology over again. Right click on the network icon on the taskbar and choose "Network and Sharing Center". Click on the network connection and from the status box which opens, click on the Disable button. After a few seconds, enable information technology and see if it helped.

If y'all click on the Diagnose button next to information technology, it will start the Network Diagnostic Troubleshooter.

3] Ability wheel the Router

Sometimes, a simple power cycle can fix the upshot. Shutdown the router. Remove the power plug from the router afterward turning information technology off. Leave it for a minute, plug in the power cord, and plough it on and cheque.

iv] Cheque with another device

Endeavor the router with another Windows device. That will give you an idea if the trouble is with the Windows device or the router.

v] Device Drivers

Check if the device supports the router. Ensure that y'all are using the correct device drivers required for the router to perform correctly. If needed, uninstall and re-install or update the Driver software.

half-dozen] Plow on Network Discovery

Open Control Panel > Network and Sharing >Alter avant-garde sharing settings. Hither select Plow on network discovery and as well Turn on file and printer sharing and see if information technology helps.

7] Run the Troubleshooters

Run the Network Troubleshooter. To start Windows Network Troubleshooter, type Network Troubleshooter in the search box next to Beginning Button. Click on Identify and Repair Network Connections from the list that appears. That will offset Windows Network Troubleshooter. The wizard will atomic number 82 you through steps to troubleshoot the connection problem.

You lot may also run the following troubleshooters:

Internet Connections Troubleshooter
Printer Troubleshooter
Network Adapter Troubleshooter.

You will be able to access them all using the command line, our FixWin or from the Windows x Troubleshooters Page.

8] Network Reset

Use the Windows 10 Network Reset feature and see if that helps you.

9] Contact their support

Contact the device manufacturer and your Internet access provider and meet if they have a solution.

Thanks for the images @MrDeanoLemon

If y'all need boosted ideas, you may take a look at the following posts:

Windows cannot connect to the Net
No WiFi after upgrading to Windows 11/10
Windows Connectivity problems with Hotspots and Wi-Fi adapters
Network & Internet connection issues
No Internet Access in Windows eleven/10
No internet, secured error in Windows eleven/10
Dial-up Error 633 The modem is already in use or is not configured
Limited Network Connectivity message.

Anand Khanse is the Admin of TheWindowsClub.com, a 10-twelvemonth Microsoft MVP (2006-sixteen) & a Windows Insider MVP. Delight read the entire mail & the comments kickoff, create a Arrangement Restore Point before making whatsoever changes to your system & be careful most whatsoever 3rd-party offers while installing freeware.